nobile performance

[olddodgetruck]

anyone know the number to nobile performance. my friend needs a tranny bad. or know of any outher good shops in the tri state area

[Jim]

noble perf

394 Wolcott Rd
Wolcott, CT 06716
203-879-9948

also check out mass diesel at the top of the forum page

[97dodgectd]

noble perf

394 Wolcott Rd
Wolcott, CT 06716
203-879-9948

also check out mass diesel at the top of the forum page

only check out mass diesel if you like having to drive back many times and don't need your truck for 4-6 months

where does your friend live? If he lives near manchester area let me know, cause i have a guy that will put a built tranny in your truck in a week from the day you drop it off in most cases sometimes it takes a week and a half.

[Warpig]

only check out mass diesel if you like having to drive back many times and don't need your truck for 4-6 months

where does your friend live? If he lives near manchester area let me know, cause i have a guy that will put a built tranny in your truck in a week from the day you drop it off in most cases sometimes it takes a week and a half.

Ya Ryan, he is a known Tranny builder, and there are a lot of high hp trucks running his tranny.....give me a break

[Jim]

Ya Ryan, he is a known Tranny builder, and there are a lot of high hp trucks running his tranny.....give me a break

is he taking them out or putting them in yet ryan? last I heard you had to have it out of the truck and bring it to him so he can build it.

PS Just cuz your brother drove like a jackass and broke his DTT, dont slam scott.

[97dodgectd]

is he taking them out or putting them in yet ryan? last I heard you had to have it out of the truck and bring it to him so he can build it.

PS Just cuz your brother drove like a jackass and broke his DTT, dont slam scott.

his tranny broke because, no one told him to shift into nuetral before going to D i would think a the guy who you just dropped over 8000 cash off to would tell you a few things about your new transmission. and that cracked the overdrive housing. and then him having the truck for 4months and not saying anything. isn't right in my opinion. he can build a hell of tranny it just takes a long time to get it.

[97dodgectd]

is he taking them out or putting them in yet ryan? last I heard you had to have it out of the truck and bring it to him so he can build it.



I have no idea where you heard that from or if your even talking about the same guy as me. because im talking about shawn o'hara and he drove over 60 miles with his 08 f-450 and trailer and picked my truck up from house and called me along the way. This guy can do anything you want, yes he pulls the tranny. he can fabricate anything you need. did i mention his kids wagon has a 4 link suspenstion setup.

[97dodgectd]

Ya Ryan, he is a known Tranny builder, and there are a lot of high hp trucks running his tranny.....give me a break

im not knockin nobil performance at all.

[Warpig]

im not knockin nobil performance at all.

Good, because he would find you, and make you cry like a little girl :falldownlaugh:

[PToombs]

and make you cry like a little girl :falldownlaugh:

Shoot, he does that now! :omg:

[Warpig]

Shoot, he does that now! :omg:

Lol......:falldownlaugh: Frank Noble knows these tranny's like the back of his hand :exactly:

[dieselnomad]

his tranny broke because, no one told him to shift into nuetral before going to D i would think a the guy who you just dropped over 8000 cash off to would tell you a few things about your new transmission. and that cracked the overdrive housing. and then him having the truck for 4months and not saying anything. isn't right in my opinion. he can build a hell of tranny it just takes a long time to get it.

Do you really know what happened? I don't think so. Stop with your generalizations and speculations. If your brother drove it like an azz don't blame others.

[massdiesel]

Ryan,
First off four months his truck was here lets see because I have all dates in computer and we can run them down.
1)Jared called asked for estimate on 6-30-08 email sent have documantion thru our quickbooks server on all bills and dates emailed if need.
2)7-15-08 Called back to place ordered and give deposit and was told parts would be ordered and would be called when they arrived from DTT to make appointment possibly 2-4 weeks depending on how busy they were Jared asked if truck could be towed up and told not point to til parts are on their way.I have no control over their sending of parts unless he wanted to pay extra for them to speed up and overnight products and he said NO.
3)8-13-08 Jared was called by the Julliette and told parts will be here mid week of the 18th .The next opening to do the trans was on the 25th of the month and could get it on the 27th-28th.Truck was towed in on 21st and he was told it would not be touched after the 21st as I was getting married on the 23rd and would be leaving early on the 22nd to take care of a few things.
4)8-28-08 Was contacted late afternoon for completion and truck to be picked up HE STATED I cant come til fri as I dont have a ride to get it til then because of work.In which we showed him and explained what to do for the first 100 mile break and and it would need to be serviced.He could do it himself or come back and wait for it which he made the choice to do.

[CTD735]

im sure scott or whoever at MD told him to put it in neutral first. he told me.....
get the story str8

[Stark9802]

whats all this neutral bs?

[CTD735]

i was told that it helps the trans get pressure up be4 u go and thro it into Drive or atleast thats what i thot

[massdiesel]

5) 9-15-08 1000k mile service done
6) 10-11 Called and said trans had issue was told to bring it in ASAP and would look at it for him was towed in on 10-12-08 I left on 12th for MIR in MD for world finals and wouldnt be back til mon the 15th. When I got home disassembled trans and called him on the 15th and never got a call back til the 17th .Explaining to him that he had ripped the back of the trans case apart and he admitted being stuck then quick change of story when i asked so you were going from reverse to drive when you were stuck in 4wd he said no i was in 4wd going fwd.Well the broken parts dont like and he was shown the parts and pics taken So he was charged for a case and damaged parts no labor as it was not covered under DTT warranty.
7)Truck was picked up on 10-24 and he was shown the parts and explained what happened and why and you were here in my shop with him!!!!!!!
So below you will see pic attached of what was done if you want more let me know!!!!!!!

[massdiesel]

Sorry pics are to big if someone can resize let me know and will post them

[BlkRam1]

Sorry pics are to big if someone can resize let me know and will post them
Scott send em to brookeandtodd@sbcglobal.net.

[CTD735]

scott why is it that its good to go in N before you put it in drive again if im wrong? if u dont mind explaining

[Warpig]

Scott, we all know you are a good tranny builder, we also know Ryan talks out his azz. Thanks for clearing things up!, and presenting facts!

[massdiesel]

No one ever told him anything about not to go to or go to n.He was do not rock the truck back and fourth from r-d-r-d-r-d constantly or something will break with your foot in it!!!!! Common sense its only a plastic one way sprag.Stock or non stock trans it will break.

[massdiesel]

Todd will be posting pics thanks.

Thanks Tim .How did you make out with your pump all set!!!!

[dieselnomad]

I've always had a great experience with Massdiesel. I originally found them when I had my truck apart from the front-end. they did a great job. I've since had several jobs done by Massdiesel and it's been great. I've found that if I've had a issue, Scott has been very responsive to get it taken care of. Class A service all the way!

[CTD735]

lets get goin with the pics todd :smokin: haha jk. on a side note...My engine built buy Massdiesel is running mint. and my stock trans he build runs great(for now) too for a stocker :HoleShotHolset:

[BlkRam1]

lets get goin with the pics todd :smokin: haha jk. on a side note...My engine built buy Massdiesel is running mint. and my stock trans he build runs great(for now) too for a stocker :HoleShotHolset:

Cant post em, Im on my daughters Trs80, I sent em to someone else to post.

[CTD735]

Cant post em, Im on my daughters Trs80, I sent em to someone else to post.

FAIL.........:stirthepot:

[Warpig]

Todd will be posting pics thanks.

Thanks Tim .How did you make out with your pump all set!!!!

Yes Sir, pump all set!!...thank you!!

Tranny pics:

http://i44.photobucket.com/albums/f18/Tim789/TDR/DSCN1319.jpg
http://i44.photobucket.com/albums/f18/Tim789/TDR/DSCN1320.jpg
http://i44.photobucket.com/albums/f18/Tim789/TDR/DSCN1321.jpg
http://i44.photobucket.com/albums/f18/Tim789/TDR/DSCN1323.jpg

[Big John]

All I can say about the trans pics is.....


KABOOM

[95Cummins]

I too would like to hear about the whole Neutral thing... Does this apply to 48re's too? What about if you have a valve body that circulates fluid in park, even then?

Thanks

[97dodgectd]

. he can build a hell of tranny it just takes a long time to get it.

Scott, we all know you are a good tranny builder,
if you look there in my post. i said he can build a hell of tranny, and he is scott.
I too would like to hear about the whole Neutral thing... Does this apply to 48re's too? What about if you have a valve body that circulates fluid in park, even then?

Thanks

from what i have been told thru the grapevine you want to hit N before D to R something having to due with high line pressure. :dunno:

and Scott this is what was going on right before the transmission broke, my brother was stopped D on a closed road engaging his 4wd so he could do a boosted launch to race a 1990 mustang. as soon as he tried to engage 4wd several of my friends and I all heard a loud noise, and his truck would not move in D so i told him disengage 4wd and try 1st or R what do you know they both work no noises. so he drove a mile home in 1st gear. and called a tow truck had the truck up there whatever day you say it was. whether he was hitting N before D and R idk but the only R,D,R,D would be him turning around, he was never stuck.

[ktmcowboy]

if you look like there in my post. i said he can build a hell of tranny, and he is scott.


from what i have been told thru the grapevine you want to hit N before D to R something having to due with high line pressure. :dunno:

better yet! Get a standard ya turds!

[97dodgectd]

better yet! Get a standard ya turds!

no standard transmissions are for towing, thats why my dads turtle has a 5spd in it, because back in april of 2000 when he was at columbia ford he was look for a cummins with a 5spd behind to tow his equipment with. and when he bought his truck his original clutch lasted over 120,000miles, but the truck was stock too. I do almost no towing, my brother does even less towing. I bought my truck because i knew 12v's could make good power and go fast for little money. my brother bought his for the same reason.

[95Cummins]

better yet! Get a standard ya turds!

Had one, miss it some days, gonna get another some time. :smokin:

[95ctd]

Had one, miss it some days, gonna get another some time. :smokin:

:HoleShotHolset: have a auto go fast truck, and a stick daily truck like someone else on here:exactly:

[95Cummins]

:exactly: :HoleShotHolset: