Finally,my truck is out of the garage!!

[bartlett]

Well I finally got it out of the garage and got to run it :97DodgeCTD:(notice I did not say all done:smokin:)The r700 twins,Hamilton Springs,ARP head studs,and F-1 Flux 2 injectors.Wow does it rip:woohoo:Boost is almost insanteneous,egt's cool.What more could you want?? I still have to do my Hellman fuel tank sump,install the air dog and at some point the Floor It stage 3 pump.So far I am a happy camper.I have quite a few pics but couldnt figure how to post them albeit the best efforts of Jim and Tim:HoleShotHolset:

[1JP]

See if you can E-mail them to me, I'll get them posted :popcorn: :smilielol:

jpctus@yahoo.com

[PRattenbury]

Funny, I can't get my truck INTO my garage...

[CamperDave]

Funny, I can't get my truck INTO my garage...
I think your truck spent too much time in the Derby garage, it now had a garage phobia! :falldownlaugh:

[Jim]

Mike you going to NPD open house/Dyno?

[bartlett]

1JP sent you a pm.Jim I am planning on going.There should be a few guys from here heading down there

[Jim]

Sweet, your truck should put down some impressive #'s:popcorn:

[1JP]

These are not my pics, I will not accept responsibility for them :smilielol: I'm simply posting them :exactly:

Before
http://img.photobucket.com/albums/v654/Zukimog/Bartlett%20Pics/mbefore.jpg

#6 "uuhhh"
http://img.photobucket.com/albums/v654/Zukimog/Bartlett%20Pics/m6uuhhh.jpg

Bagged up by cylinder
http://img.photobucket.com/albums/v654/Zukimog/Bartlett%20Pics/mbaggedupbycylinder.jpg

Installing Tool Base
http://img.photobucket.com/albums/v654/Zukimog/Bartlett%20Pics/minstallingtoolbase.jpg

[1JP]

Installing on the top
http://img.photobucket.com/albums/v654/Zukimog/Bartlett%20Pics/minstallingtop.jpg

The lonely injector
http://img.photobucket.com/albums/v654/Zukimog/Bartlett%20Pics/mlonelyinjector.jpg

Removing HP line from injector tube
http://img.photobucket.com/albums/v654/Zukimog/Bartlett%20Pics/mremovinghplinefrominjtube.jpg

Removing injector tubes
http://img.photobucket.com/albums/v654/Zukimog/Bartlett%20Pics/mremovinginjtubes.jpg

Removing the rockers and bridges
http://img.photobucket.com/albums/v654/Zukimog/Bartlett%20Pics/mremovingrockersandbridges.jpg

Showing tool compressed
http://img.photobucket.com/albums/v654/Zukimog/Bartlett%20Pics/mshowingtoolcompressed.jpg

[1JP]

Some injectors removed
http://img.photobucket.com/albums/v654/Zukimog/Bartlett%20Pics/msomeinjremoved.jpg


Stock springs removed
http://img.photobucket.com/albums/v654/Zukimog/Bartlett%20Pics/mstocklefthamiltonright.jpg

http://img.photobucket.com/albums/v654/Zukimog/Bartlett%20Pics/mtoolremovedstocksprings.jpg

[bartlett]

Thanks for posting the pics! Sorry no reassembly pics as I didnt think I would get them posted so didnt take any more.

[dieselnomad]

great pix!! but, WHOA!!! Hold on there pardner... What's up with all the extra parts... doood.. :smokin: :smilielol: :falldownlaugh:

[bartlett]

great pix!! but, WHOA!!! Hold on there pardner... What's up with all the extra parts... doood.. :smokin: :smilielol: :falldownlaugh:Which ones?:popcorn:

[1JP]

No problem, anytime :woohoo:

[Jim]

Which ones?:popcorn:
I can count an extra 12!:smilielol:

[05lonestar]

Some injectors removed
http://img.photobucket.com/albums/v654/Zukimog/Bartlett%20Pics/msomeinjremoved.jpg


Stock springs removed
http://img.photobucket.com/albums/v654/Zukimog/Bartlett%20Pics/mstocklefthamiltonright.jpg

http://img.photobucket.com/albums/v654/Zukimog/Bartlett%20Pics/mtoolremovedstocksprings.jpg

it all looks like something i did over last weekend, minus the twins and injectors.

[05lonestar]

any issues with valve lash? i had to do mine a second time. seems better now, just my water pump is shi tting the bed, gotta do that tomorrow.

[Diesel97]

it all looks like something i did over last weekend, minus the twins and injectors.

Watcha waiting for?:poke:

[dieselnomad]

I can count an extra 12!:smilielol:

:exactly: :smilielol:

Looks good, are you enjoying the twins? :HoleShotHolset:

[bartlett]

I can count an extra 12!:smilielol:

Oh thats right ,I forgot a few of you are still running antiques:poke:Back in 98?? they added 2 more valves per cylinder and is known as a 24 valve:poke:.
My valves I set once and a few were out of spec.I dont hear the occasionally ticking that I did before.There is nothing like the feel or sound of twins:woohoo:I cant believe how fast they build boost.I dropped the tank last nite and am in the process of installing the Hellman sump and Air dog.There is WWAAYY more power in this thin:97DodgeCTD:g than a normal person could want.I tested up to Smarty level 8 (revo soon to be tnt).........

[05lonestar]

i was putting down just shy of 500 hp with stock fuel system and injectors, silver bullet turbo with smarty tnt/r on 9. got the hamilton cam, and 110lb springs. so you should be quite a bit more with the additional mods

[05lonestar]

Watcha waiting for?:poke:

that green paper stuff with dead presidents on them. :nutkick:

[bartlett]

howd you like doing your cam install?

[DCreed]

Oh thats right ,I forgot a few of you are still running antiques:poke:Back in 98?? they added 2 more valves per cylinder and is known as a 24 valve:poke:.
My valves I set once and a few were out of spec. I dont hear the occasionally ticking that I did before.There is nothing like the feel or sound of twins:woohoo:I cant believe how fast they build boost.I dropped the tank last nite and am in the process of installing the Hellman sump and Air dog.There is WWAAYY more power in this thin:97DodgeCTD:g than a normal person could want.I tested up to Smarty level 8 (revo soon to be tnt).........

Brother has seen the light! can I get a HALLELUJAH !!:encore: