NEED 3K GSW install help

[NHRedneck]

ive got the 3k governor washer mod washers, i just need someone to show me how to install em. my tranny is kinda up to the task w/ a suncoast triple disc converter and valve body. im already starting a savings acct for buying a new unit, however i really really need to add the wot power band, kuz this 2400 defueling is just killing me:duh: . im located in greenville NH, howver i travel to manchester almost daily. anyone who can give me a hand would be greatly appreciated :beerchug: - david

[matt95]

Maybe this will help. It's not that hard of a job.
http://www.piersdiesel.com/TechGSK12V.htm

[killed300ex]

If you can come to Rochester NH one night I would be willing to help I just dont have the time to travel. Not that hard of a job maybe an hour or so to do it.
Let me know as I just had help installing mine
Evan

[sooter]

NH... dyno day someone will help ya...hopefully i'll be there if you'd like some help. it's all in the mind:duh:

[NHRedneck]

matt 95, ive read about every g/d artice out there about how to do it, i just dont quite understand the whole process or feel completely comfortable DOING IT.

killed300ex gimme an adress and lemme know when your typically available. ive gotta kick this cold i managed to get, but maybe later this week i can come on over.

sooter, if i dont manage to get it done by the time the dyno day rolls around ill make sure to snag you and we will take a short break and head over to my house down the road and do the mod @ my house.


thanks for the replies everyone - david

[sooter]

well, if you make it up here to meet up with evan, let me know....i live in the same city as him...we just did the gsk on his truck the other day:popc1:

tom

[Ramdriver15]

its very simple, i did mine and they work Wicked pissah.... lol
Take the plunge and try it, get creative or have some pacience to wait till dyno day!!!!:woohoo:

[NHRedneck]

tom ill keep you posted if i get a chance soon to head over to rochester to evans'. i would love to get this done b/c i know that this mod is raved about how FKA it is. someone gimme an adress and when later this week will work for them and ill be there.

[killed300ex]

I am free pretty much any weekday night after 5. Weekends are bad as I am usually busy with friends and taking road trips to pick up equipment.
Ill send you a PM

[NHRedneck]

well im hoping things are still going through for tomorrow night in rochester, we might be doing it outside. it all depends on wether evan was able to borrow a shop or not, but im kool with doing it outside if thats what its gonna take to get it done, sooter if you wanna join feel free :popc1:

[sooter]

yeah, sure. there's a slim chance i may not be here, but if i am i'll meet up with you. evan may still have my phone number.

[NHRedneck]

:duh: you sir have a pm

[killed300ex]

Hear you got it back together sorry about having to leave before getting it back together just got back to my house at 1130 so I am glad I left when I did. Hope its running good now.
Evan

[NHRedneck]

Hear you got it back together sorry about having to leave before getting it back together just got back to my house at 1130 so I am glad I left when I did. Hope its running good now.
Evan

yeah i got it running, i left @ 9pm, though its only idling @ 400 in park and it will stall in gear....... still drove it home, still drove it to work and im gonna get everything tweaked properly tonight at my shop. right now it only fuels to 2800 so i think im gonna take it back apart and go an extra 1/2 or 3/4 turn on the keepers to get the extra 200- 300 rpm out of it.

[sooter]

in what way does it fuel to 2800? just on acceleration or if you hold it wide open in neutral?

[NHRedneck]

in what way does it fuel to 2800? just on acceleration or if you hold it wide open in neutral?

at wot under load (driving) it would only fuel to 2800......... so i got back in there and turned the keepers an extra half turn, now it will fuel while driving right to 3000.

[BelgianMagic]

CONGRATS on the MOD Dave !:exactly:

[sooter]

good to hear you got it running....now it's a dyno time:beerchug:

..btw, what's up with the sheep-humping smiley?

[dieselnomad]

..btw, what's up with the sheep-humping smiley?

Huh? What you talking about? Maybe only you see that, ya know a northern NE kinda thing... :smilielol: :poke: :smilielol:

[sooter]

hey, it's not like it live up in washburn, maine or wherever.. some odddddd people up that way

[dieselnomad]

yah, i used to live up in the northeast kingdom in VT for 'bout a year. I know first-hand the oddity...

[sooter]

:sheephump: