PDA

View Full Version : 6.0 BG Intake cleaning


RICTD
11-25-2009, 06:04 PM
Has anyone here done this to their 6.0's? I personally have performed this 100+ times and finally feel like we have this foolish EGR situation under control with the E-Series 6.0's... For those of you near by I can scan in the write up on this and post the whole process if anyone is interested... if everyone just deletes it then I wont bother :falldownlaugh:

RICTD
11-25-2009, 09:43 PM
So this is the Intake prior to cleaning

http://farm4.static.flickr.com/3379/3663514133_b693c1270e.jpg

http://farm3.static.flickr.com/2557/3664315666_9549de37ab.jpg

http://farm4.static.flickr.com/3404/3663514249_3fc81b02ca.jpg

After the initial hand cleaning of the intake...

http://farm4.static.flickr.com/3372/3663514505_37aa22ec8c.jpg

http://farm4.static.flickr.com/3374/3663514621_cb6c0308ec.jpg

http://farm4.static.flickr.com/3651/3663514705_ac0fb06287.jpg

http://farm4.static.flickr.com/3306/3664316290_57dd903550.jpg

http://farm4.static.flickr.com/3545/3663515099_48ff19f5c2.jpg

http://farm3.static.flickr.com/2452/3663514999_8de9e118cc.jpg

and this is after... I wish this picture came out better but the metal was so clean the flash blinded the picture for the most part.

http://farm4.static.flickr.com/3560/3663515141_b95e847b9d.jpg

Jim
11-26-2009, 09:09 AM
wow thats a mess pre-cleaning:wtf2:

sooter
11-26-2009, 09:41 AM
ha nice.


one of my customers sells BG products....he does very well which i guess speaks for their products

Tooned
12-08-2009, 06:31 PM
where does all the garbage that comes off inside of the intake go?

jdc753
12-08-2009, 09:47 PM
where does all the garbage that comes off inside of the intake go?

Guessing from the second to last pic it gets shot out the exhaust

Wish I had some pics when I pulled my EGR valve, its was way beyond plugged, took me a couple minutes poking at it with a screw driver before I even found the upper opening :nutkick: Then has to rig up a funnel to a shop vac to clean out the chunks of carbon that dropped into the intake

Tooned
12-08-2009, 09:51 PM
yeah i saw that after, i dunno if im to crazy about unloading all that junk into the combustion chamber, ive seen some pretty hard chunks of carbon fall out of these intakes when theyre off, hate to see what damage that could do. yeah it can get pretty nasty in there, im glad i havent run EGR on mine, stays pretty clean.