surgery has started 12valve into my k20

[sharpmotors]

well i pulled it into the shop today and started to rip it apart.i will be leaving sunday 2am and head to ohio were i found my donor truck load it up and head right back home:woohoo:.i will be posting pics along the way and asking question's wish me luck...:97DodgeCTD:

[sharpmotors]

out with the old in with the new:nutkick:

[Moose]

Nice!! How did you do the Motor mounts? :popcorn: What are you using for a Transmission?

[1JP]

Good luck Larry :HoleShotHolset:

[sharpmotors]

Nice!! How did you do the Motor mounts? :popcorn: What are you using for a Transmission?

i got a motor mount and frame support from tennesee diesel conversions,i am using a 47rh with a right hand drop transfer case,i used to stock dodge trans mount with some very minor mods to my chevy cross member.today i got all my cable hooked up the heater core hoses,my water temp and oil pressure guages.so for this has been a very easy swap.before you no it:woohoo:

[Jays02F250]

i cant wait to see this rig done it sounds sweet

[Jim]

Damn sounds like you are moving right along!!:eek:

[sharpmotors]

Damn sounds like you are moving right along!!:eek:

getting there little by little.

[sharpmotors]

got some more done today,a/c is in,intercooler is 90% in,starter is wired,tomorrow the fuel system and trans cooler get done.man i am so stoked i cant wait to fire it up:Signal73:

[1JP]

:HoleShotHolset: :HoleShotHolset: :HoleShotHolset:

[Diesel97]

:worthless:

[sharpmotors]

ok ok i will have some pics up tomorrow.

[Diesel97]

ok ok i will have some pics up tomorrow.

:popcorn:

[Jim]

Is it tomorrow yet? :popcorn:

[95ctd]

not yet 2.5 more hrs

[Moose]

Is it tomorrow yet? :popcorn:

It is in Australia:exactly:

[sharpmotors]

here we go

[sharpmotors]

more pictures

[sharpmotors]

some more

[1JP]

Looking good Larry :HoleShotHolset:

[95ctd]

Haulin some azz nice:HoleShotHolset:

[02smokemaker]

Looks awesome!!

[Moose]

http://www.newenglandturbodieselpower.com/Forums/attachment.php?attachmentid=649&d=1267543875
Did you cross the exhaust pipe over to clear Transfer Case?

http://www.newenglandturbodieselpower.com/Forums/attachment.php?attachmentid=650&d=1267543898

Also, are you doing a stack? Nice Job and it's Look'n GooD!!:HoleShotHolset::smokin:

[Ramdriver15]

mmmm smoke stacks...

[sharpmotors]

http://www.newenglandturbodieselpower.com/Forums/attachment.php?attachmentid=649&d=1267543875
Did you cross the exhaust pipe over to clear Transfer Case?

http://www.newenglandturbodieselpower.com/Forums/attachment.php?attachmentid=650&d=1267543898

Also, are you doing a stack? Nice Job and it's Look'n GooD!!:HoleShotHolset::smokin:

yes,im running a single 6 inch stack, i had to cross over there was not enough room to clear 4 inch pipe.

[2005 D-max]

what did you use for motor mounts, and what are you runing for a transmission. it looks good so far!

[sharpmotors]

i am running a 47rh with a 241d transfer case.i bought a set of mounts from tenessee diesel conversion.

[sharpmotors]

well i am at the end of my build i have a few little things to do and hopefully before the day is over tomorrow i will fire it up.if all goes well by the weekend i will have the hood and fenders back on and down the road i go :woohoo:.i will post up some more pics of the rest of my build shortly :HoleShotHolset:

[sharpmotors]

it alive and running:woohoo:

[Jim]

drive to coffee night!:exactly:

[sharpmotors]

im hoping to stop down next friday i have a few things to button up and i have to put the hood and fenders on.

[sharpmotors]

well i think its done took it for a ride had a few little issues buttoned them up and all seems well.all in all it took me a month and a week from start to finish and im very plesed with the turn out.i will not be posting any pics hopefully tomorrow night if you guys are around i will drop in and introduce my self and let you guys check it out.:woohoo:

[Jim]

Sounds good man. Tentatively Ill be there for 7 for a little while:popcorn:

[95ctd]

I'll be there, hopefully working on my door hinges if no one else has any pressing issues

[Big John]

Good Seth, I'll watch you do yours so I ca know what not to do on mine!! Wait htat was last week, CRAP!!

[TORQUE THIS]

Good Seth, I'll watch you do yours so I ca know what not to do on mine!! Wait htat was last week, CRAP!!

It was LAST YEAR!!!! :falldownlaugh:

[Big John]

It was LAST YEAR!!!! :falldownlaugh:

Good Catch..:drunk:

[matt95]

Good Catch..:drunk:

AHAHAHA! that's some funny stuff right there. Damn Pollocks. :smilielol:

[TORQUE THIS]

Pollock (or pollack, pronounced the same and listed first in most UK and US dictionaries) is the common name used for either of the two species (http://en.wikipedia.org/wiki/Species) of marine (http://en.wikipedia.org/wiki/Ocean) fish (http://en.wikipedia.org/wiki/Fish) in the Pollachius genus (http://en.wikipedia.org/wiki/Genus). Both P. pollachius (http://en.wikipedia.org/wiki/Pollachius_pollachius) and P. virens (http://en.wikipedia.org/wiki/Pollachius_virens) are commonly referred to as pollock. Other names for P. pollachius include the Atlantic pollock, European pollock, lieu jaune, and lythe; while P. virens is sometimes known as Boston blues (distinct from bluefish), coalfish (or coley), Silver Bills or saithe.



The noun Polack (pronounced /ˈpoʊlɑːk, -læk/ (http://en.wikipedia.org/wiki/Wikipedia:IPA_for_English)), in the English language (http://en.wikipedia.org/wiki/English_language), is a reference to a Pole or person of Polish descent. It is considered offensive in some contexts.[1] (http://en.wikipedia.org/wiki/Polack#cite_note-0). It is an Anglicisation of the Polish language (http://en.wikipedia.org/wiki/Polish_language) word Polak, which means a Polish male person (http://en.wikipedia.org/wiki/Poles) (feminine being Polka). Although the Polish word has a neutral connotation, the English loanword (http://en.wikipedia.org/wiki/Loanword) "Polack" can be used as an insult, sometimes (but not always) with the specific implication that Polish people are especially unintelligent.



OK, which one is it Matt??? :falldownlaugh::smilielol::idea:

[Jim]

this one!

The noun Polack (pronounced /ˈpoʊlɑːk, -læk/),

[95ctd]

Good Seth, I'll watch you do yours so I ca know what not to do on mine!! Wait htat was last week, CRAP!!
:falldownlaugh: It was one of those up till 3am nights everyone left except Matt and Toolman. Don't blame em either :smilielol:

[Jim]

By that time everyone else would have been too drunk to render assistance anyways :smilielol: