CT Coffee Nites! 2007 Check for updates weekly

[ToolManTimTaylor]

--------------------------------------------------------------------------------
Well here is the official "Coffee Nites" thread where we discuss what's going on. Weather it be idle banter or what is doing on the upcoming meet which usually lands on Friday nites. Check often and keep drinks away from your P.C because you may just laugh your way to a new keyboard :-laf

FROM NORTH OR SOUTH ON ROUTE 8
"Exit 15 CT-34 Derby"
Turn Right At End Of Ramp
1/10th Of A Mile And Keep To The Left
You will see TAILGATORS on the left at this point while you are at the light.
Turn Left On CT-115, Derby Ave And Go North For 0.6 Miles to 326 Derby Ave
Driveway Is Just After An Empty Lot And Between Two Brick Buildings On The Left.

[TORQUE THIS]

:m2c: :loser: :smilielol:

[Jim]

Like the new smiley assortment eh?

[Stark9802]

Test 1 ... 2... 3 .....

Hey people that made this site......:yourock:

So we can post pics with boobs in here? ....................... only thumbnails? :bigfinger:

[TORQUE THIS]

What's this ****... "Pontiff-In-Training" :bigfinger: :loser:

:pointlaugh:

[TORQUE THIS]

The pontiff was here and didn't do anything to AJ's pics... :)

They do need to be bigger IMO...

[TORQUE THIS]

Uh,Oh... Pontiff junior is on now... :poke:

[Jim]

aw for christ sake guys until we hammer out the details of censorship take it easy eh? :smokin:

[Jim]

Uh,Oh... Pontiff junior is on now... :poke:

:smilielol:

[Stark9802]

Roger that....

[Jim]

thanks man, I am now waking up after sleeping all day because I was Puking and 'ol liquid #2 all last night. NOT FUN!!!

I suspect the lunch I had yesterday did me in, still feel crappy tho, I nearly blew toolman out of his basement last night when it started to kick in.

No mapp gas torches around to quench it :oops:

[Jim]

I want a bloody avitar!!!!!!!!!!!!

Hey Tim, you can go to user cp at the top of the screen, then edit avitar and upload it like that.

It needs to be no more then 80X80 pixels for it to upload.

[<T M T T>]

Wholly geeezus butt flappin' christ that was bad! Dude I swear this website smells now.

:nutkick:

[Stark9802]

then edit avitar and upload it like that.

It needs to be no more then 80X80 pixels for it to upload.

its not working like that.

[TORQUE THIS]

The avitar option is locked out for me...

[Stark9802]

me 2 :wtf2:

[<T M T T>]

Guys server storage is disabled for avitars. HOWEVER You can link avitars from a photo hosting site of your choosing (Like photobucket).

[Warpig]

Anyone meeting in Derby tonight?

[TORQUE THIS]

Guys server storage is disabled for avitars. HOWEVER You can link avitars from a photo hosting site of your choosing (Like photobucket).


IT'S LOCKED!!!! Can't do anything...

[TORQUE THIS]

23 posts here added to the TDR would put us really close... :m2c:

[Jim]

copy and paste:)

[TORQUE THIS]

Jim, AJ, you have mail... :smileysex:

[Jim]

It's a moderator thing :yankyank:

not anymore....

[Jim]

Jim, AJ, you have mail... :smileysex:
great now I have to go :yankyank: :smilielol:

[Stark9802]

great now I have to go :yankyank: :smilielol:

:pointlaugh: :withstupid:


Hey Jim....is there something i need to do so that when I post pics they dont just show thumb nails....I noticed the pet thread are big pics...but the thread i just made in the landscape page- the pics came out small ?

[Warpig]

pet pic's are photobucket (just linked). By the way, how did you post your pics, if i click your pics they get bigger.

[Jim]

:pointlaugh: :withstupid:


Hey Jim....is there something i need to do so that when I post pics they dont just show thumb nails....I noticed the pet thread are big pics...but the thread i just made in the landscape page- the pics came out small ?
Yep like tim said, Use a photobucket account http://photobucket.com/ upload your pics there and copy and paste the IMG code they supply you with. Whats great about that is you dont have to do any resize BS like on the TDR, it does it automatically for you.:)

[Jim]

will make it look like this:

http://i100.photobucket.com/albums/m13/signal73/Camera20pics20110520002.jpg

[Warpig]

Hey Jim, I tryed the IMG code (paste) and it didn't work. I used the URL (paste) option. Is that right??

[Jim]

I dunno tim I click on img code, it automatically copies and works for me after I paste it.

http://i100.photobucket.com/albums/m13/signal73/Camera20pics20110520002.jpg

thats the one for aj's truck above.

[Stark9802]

Cool..I'll try it

[Stark9802]

By the way, how did you post your pics, if i click your pics they get bigger.


I uploaded them the same way as tdr

[ToolManTimTaylor]

He attached them.

[Stark9802]

Thanks guys..i think i got it...

[Stark9802]

LOL...I knew it would make you happy

[Stark9802]

hey...lets not get pig too upset. I still am enjoying Mr. Smarty:)

[TnLRacing]

Shameles plug once again.......

Tonight guy 6pm, see me at the door, and its only $20 be sure to ask for Me
we are expecting 4 or 5 strippers. Plus food and Beer!

http://img256.imageshack.us/img256/1932/stag2ll.jpg

[Stark9802]

I'm a no go mike. sorry. Money just isn't there :(

[Jim]

I am out mike, still in sick bay...:thumbdown:

Hope you guys make some good $$$ for the groom:smokin:

[Jim]

Todd,
Ford owns cummings? :wtf2:

[matt95]

Jim timing didn't slip. That valet works good. Thanks again.

[Jim]

Good to hear...no problemo

[Stark9802]

Jim. Send Matt the Email to..............:smileysex:

[Jim]

10-4 on the :smileysex: :smilielol:

[Stark9802]

:yourock:

Hey matt, Do you like the beatles? :yankyank: :smiley35:

[Jim]

:pointlaugh: :smilielol:

[matt95]

very nice:yankyank: :smilielol:

[PRattenbury]

Starting the truck at the airport was unusual. Sounded like I dumped my toolbox into the oil pan and started it. Only lasted a few seconds, though. I think I'll be at the shop in the afternoon tomorrow so I can put the PIAAs on.

[Jim]

why didnt you plug it in?

OH NEVERMIND :smilielol: :poke:

[Jim]

And more importantly what did you bring me back from Scheid? :popc1:

[PRattenbury]

A nice shortblock. Then I went down to Texas to Raymac and got a head. The big brown truck should bring them to your house this week.

[Jim]

:yourock: !!!

[ToolManTimTaylor]

Wanna see a pissed off UPS guy :pointlaugh:

[PRattenbury]

Got the PIAAs in. They look good. Didn't wire them up yet, since the front bumper's prolly coming off soon anyway. :crazy:

[matt95]

Just use wire nuts so they come apart easily. :smilielol:

[PRattenbury]

Now, there's a thought. :rolleyes:

[Stark9802]

Hey Mike...How was the show?:encore: :woohoo: :smokin: ?

[Jim]

Any patriotic babes? :flag_usa:
http://i100.photobucket.com/albums/m13/signal73/bikini_stars.jpg

[Stark9802]

lol...you've been dying to use that smile face havn't ya jim..:poke:

[Jim]

:whip: shoulda used that one maybe there were some S&M chicks there... he hasnt replied yrt so must have been a good night..:happydrunks:

[Big John]

So this is how the other side looks..... :yankyank: :flipa: :nutkick: :bowdown2:

[Stark9802]

heyyyyyyyyy big john. here ya go.......

http://i157.photobucket.com/albums/t80/Stark9802/Bigjohn.jpg


http://i157.photobucket.com/albums/t80/Stark9802/Sweet.jpg

[<T M T T>]

Oh man that coal miner's song "Big John" is in my head. :dontgetit:

[matt95]

hey pope did you get your other brake drum yet?

[TnLRacing]

Show was good, Im sure MoparMike can confirm that! I will say that there is probably one 18 year old guy that will never be the same!:whip:

[<T M T T>]

hey pope did you get your other brake drum yet?

yes My son, You are now Obsolved of all your sootings :)

Now if I could just find some time to install those new stoppy thingys ???

[Jim]

im around all nights this week if you need a hand....

[Jim]

So this is how the other side looks..... :yankyank: :flipa:
See ya got the smiley thing down pat :poke: :pointlaugh:

[matt95]

Yeah Tim, Jim would like to give you a hand.:yankyank: :smilielol:

[<T M T T>]

Dude that was :41031:

[Stark9802]

Ahahahahahahahahahaahahahhaahaahaha Thats Killer!!:smilielol: :encore: :w-flag: :bowdown2:

[Jim]

Yeah Tim, Jim would like to give you a hand

you shouldnt be jealous, after all i gave you a hand with your head:smilielol: :smilielol: :bigfinger:

[Jim]

Matt i pulled the trigger and decided to be on drugs like you. should be here this week :woohoo:

[matt95]

Nice. Once you try it your hooked.

[Jim]

Thats what I hear :smilielol:

I guess i will get a pallet of WW from sams club :)

[Stark9802]

whats WW?................

[matt95]

Secret drug slang.

[Stark9802]

ok ill go ask warpig

[Jim]

ask you local drug dealer AKA gas station attendant or wal mart employee

[PRattenbury]

You going with the extra-large tank?

[Jim]

as of right now, no. I think im going to go off the existing WW tank in the truck. Theres really no where to mount the 1 gal tank that comes with it, so figuring the factory one is a gal Ill skip that.
I would consider the extra large, but that takes up space in the bed where the truck box resides......

[Warpig]

ok ill go ask warpig

Pssst.........Windshield Wiper fluid :pigfly:

[PRattenbury]

How much mix does it consume? Is it something that will require constant checking and filling, or will it last a while with a small tank? Did you go with CoolingMist or Snow's? Did I ask enough questions? Huh? Huh? Did I? :popc1:

[Jim]

How much mix does it consume? A gallon after 3 WFO 1/4 mile runs from what I understand.
Maybe matt can add to this with normal in town/highway driving

Is it something that will require constant checking and filling, or will it last a while with a small tank?

Should be ok for a while, you can turn it on and off also.

Did you go with CoolingMist or Snow's?Snow performance stage 3

Did I ask enough questions?
I now have carpel tunnel and need a new keyboard :falldownlaugh:

[PRattenbury]

I believe I've got a coolant leak. Looks to be radiator or hose-related, though. :crossfingers:

[matt95]

I only ran the system for a week before popping the headgasket. I went through 4 gallons in the week. I was using it a lot though. Is addictive.

[PRattenbury]

You must've overdosed. :smokin:

[Stark9802]

Pssst.........Windshield Wiper fluid :pigfly:

Thanks professa:professor:

[Jim]

I believe I've got a coolant leak. Looks to be radiator or hose-related, though. :crossfingers:

when cold mine leaks where the upper hose goes into the thermosat housing. Tighten the clamp all you like still leak. I need a constant torque style clamp

[matt95]

Paul when are you rolling your truck into 12v corner?

[PRattenbury]

I figured I'll wait till you need my pump, and then I'll put 'er down.

[Big John]

Oh man that coal miner's song "Big John" is in my head. :dontgetit:

What's there to understand??? Just listen to the song Almighty one!:pape:

[Jim]

I figured I'll wait till you need my pump, and then I'll put 'er down.

Got all the stuff you need?

Start on friday! :idea:

[<T M T T>]

What's there to understand??? Just listen to the song Almighty one!:pape:

I take it you know it? You hero man you! :bowdown2:

[PRattenbury]

Got all the stuff you need?

Start on friday! :idea:

I have a lot of it. I could start on it. Is anyone going to Derby Friday nite from near DMcPherson? He has a cam gear for me. I still gotta get a pump, intercooler, radiator and twins. But I have lots to do while I'm stashing away the deneiros for that stuff.

[matt95]

Pauls truck= $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ $$$$$$$$$$$$$$$$$$$$$$$$$$$$4

[matt95]

Paul, I have to go up to Cummins Metropower on friday. If you have him bring the gear to work I can grab it from him. Anyone else need anything up there.

[Warpig]

Paul, I have to go up to Cummins Metropower on friday. If you have him bring the gear to work I can grab it from him. Anyone else need anything up there.

Matt, they should have a mapp sensor for me plus a wire harness. Should be about 90.00. If you can pick it up for me that would be great. If you want I can pay you ahead of time...let me know.

[PRattenbury]

Paul, I have to go up to Cummins Metropower on friday. If you have him bring the gear to work I can grab it from him. Anyone else need anything up there.

Cool. He said he has it in his truck. I got a couple boxes today. I think one is the oil pan. Jim'll have to tell me waht I gotta do to get it set up for an oil return line. Then I'll get it powdercoated, along with the other stuff in that crate at the shop. When do you want your pump?

[PRattenbury]

Hmmm-the other box was upper and lower engine gasket sets from Cummins. I have every gasket on the engine brandy-new. Now I want to find a good set of hoses, so I can replace all them. Homey don't like leaks. :whip:

[matt95]

Tim no problem. I can pick them up. Did you already order them? Give me the part numbers if not. If you aren't coming down on friday, I will be up in the Litchfield area on Saturday. I ordered a fuel pressure guage for Aaron's brother that I need to drop off.

[matt95]

Paul I will grab that gear for you. Not in any huge rush with the pump. Have to detune it until I can get a turbo anyways. I will have some money for you on friday.

[matt95]

This is nice not having to wait a minute between posts.

[TORQUE THIS]

If I remember right, the cam gear has to be pressed on and it has to be done with real percision... I'll check on it...

[PRattenbury]

Paul I will grab that gear for you. Not in any huge rush with the pump. Have to detune it until I can get a turbo anyways. I will have some money for you on friday.

Why not just take my SPS62? Looks like it isn't going to work as a good top turbo for me anyway. Works nice with the pump. No need to detune it. You and Jim just got it cranked up a couple weeks ago.

[Warpig]

Matt, I am planning on going down Fri night:crossfingers: I ordered the parts about 2 weeks ago.

[Warpig]

Matt, I just got off the phone with Cummins Metro and they have my parts (map sensor, wire harness). Need cash?

[matt95]

Just give me the money later. I may go down there today. No work today. :notworking:

[PRattenbury]

Nobody's got nuttin ta say? :wtf2:

[Warpig]

Hi Paul:pigfly:

[Stark9802]

Hi Tim....just.got your message. :encore:

[PRattenbury]

Anyone going to the shop tomorrow night?

[Warpig]

I'm gonna make a trip down....Can't say hi :dontgetit:

[matt95]

Tim, I got your parts. Paul, Dan was nowhere to be found when I went up there. No one could find him and his truck was not there. As far as the turbo, that would be great. I am really racking up a tab with you.

[PRattenbury]

Not a big deal. Looks like 12 valve corner will be occupied for a while, but hopefully a major beast will come back out. Not to worry about getting me the money. You're good for it, right?:smokin:

[PRattenbury]

Hi, Warpig.

[PRattenbury]

Tim, I got your parts. Paul, Dan was nowhere to be found when I went up there. No one could find him and his truck was not there. As far as the turbo, that would be great. I am really racking up a tab with you.

It should be interesting to see what that pump and turbo will do on drugs. :muahaha:

[matt95]

And regular tires.:smilielol:

[matt95]

Not a big deal. Looks like 12 valve corner will be occupied for a while, but hopefully a major beast will come back out. Not to worry about getting me the money. You're good for it, right?:smokin:

Yup. If you still want that foundation done we can work that in too.

[matt95]

Jim, I'm gonna do the final retorque tommorow afternoon so I will have your wrench back to you tommorow night.

[PRattenbury]

Where IS Jim? Looking at the swimsuit page? :smilielol:

[matt95]

Paul are you gonna start the tear down tommorow?

[matt95]

AJ Did you buy sand again?

[PRattenbury]

If you want the pump and turbo I can. Whenever you say, I'll start.

[Jim]

Where IS Jim? Looking at the swimsuit page? :smilielol:

Just got home from Skiing.

Sounds like we will have a few more BEAST 12 valves at the shop eh?

Enough of this coffee junk (im a tea drinker anyways) off to the swimsuit page!

[matt95]

Paul it is really up to you. If you start tommorow:yourock: .

[Jim]

paul since your in a giving mood can i have your bumper thanks, Jim

[Stark9802]

AJ Did you buy sand again?

Noooooooooo:nono: I learned my lesson. Can't belive the strom is going to miss again....Still might get 1-2 Tomorrow night.


phuck Winter!! :bigfinger:

Hey all Weathermen - :plzdie:

[matt95]

I hooked up my plow just incase.

Jim, I bought a mini mother's powerball. All I have to say is WOW!

[Stark9802]

I hooked up my plow just incase.

Me to . And it only took a minute to mount! :smilielol:

[Jim]

How you wheels can look any better I have to see this. Did you use the same mothers Mag cleaner?

[matt95]

Jim they look like a mirror. It takes about 5 minutes to do a wheel. Only did one so far because my drill battery died. I will bring it down tommorow night. Bought the Aluminum Power Ball specific stuff.

[Jim]

sweetness. Like to see what yours look like spinning on the dyno.:muahaha:

[PRattenbury]

Should spin quite nicely. Speaking of bumpers does anyone want the one behind the green machine?

[Warpig]

You guys are nuts polishing your wheels in the winter. Matt, must be a Polish thing:falldownlaugh: Get it, polish, Polish.

[PRattenbury]

Tell ya what, if Torque shows up tomorrow and is willing to drop me off on his way home I can put the truck in 12 valve corner. Source of fine diesel beasts. I owe him moolah anyway.

[PRattenbury]

Nighty-nite!

[TORQUE THIS]

Tell ya what, if Torque shows up tomorrow and is willing to drop me off on his way home I can put the truck in 12 valve corner. Source of fine diesel beasts. I owe him moolah anyway.

I could do that, but not at 2 or 3 in the am...

I have Jury Duty tomorrow... still thinkin of blowin it off... :bs:

[Jim]

ooooo lucky you. just go in with a bad attitude and they wont pick ya!

[Stark9802]

call in the morning and say you have diarerra. I did that a couple years ago , and they had no problem with me not going. (no i did not have diarerra )

[Jim]

When you're sitting in a Chevy and you feel something heavy
Diarrhea... Diarrhea...

When you're slidin' into first and you feel something burst
Diarrhea... Diarrhea...

When you're climbing up a ladder and you hear something splatter
Diarrhea... Diarrhea...

When you're slidin' into third and you lay a juicy turd
Diarrhea... Diarrhea...

Some people think it's funny but it's really hot and runny
Diarrhea... Diarrhea...

When you're driving your corvette, and you feel somthing wet
Diarrhea... Diarrhea...

When you're walkin' down the hall and you feel something fall
Diarrhea... Diarrhea

When your sliding into home and your pants are full of foam, Diarrhea... Diarrhea

[TORQUE THIS]

Even if ya did... it's OK, we can handle it...:*~**~**~**~*FAN:

What's with fan ??????

[Jim]

:SHATFAN: Had to change it around because it was called s h ** fan but that word is blocked, changed it to shat

[Jim]

ok and apparently it still does not want to work....:notworking:

:SHATFAN:

[TORQUE THIS]

Rename it "Oh For Christ Sake"...

[matt95]

Paul if we tear the pump and turbo off, I can put them in on Saturday. Then it's :omg:

[Jim]

dont forget ex manifold gaskets

[Warpig]

Matt is so serious all the time:crazy:

[matt95]

I was just thinking about the exhaust manifold. Paul, I will order a brand new one tonight for you if I can take yours. I tried to get the gaskets today at cummins but they wont have them till tommorow.

[matt95]

Matt is so serious all the time:crazy:

Where did that come from?:drunk:

[Warpig]

See what I mean :exactly:

[matt95]

Jim are you around Saturday.

[matt95]

See what I mean :exactly:

Your Mapp sensor just fell in the garbage by accident.:bigfinger: :smilielol:

[Warpig]

Where did that come from?:drunk:

These guys are talking about dump and you are talking about exhaust manifold gaskets:whack:

[matt95]

Well I'm going to take a dump on your map sensor.:SHATFAN:

[Warpig]

I already got a shot one

[Jim]

Hi Tim! :yourock:

[Jim]

Jim are you around Saturday.

for a little while....

[TORQUE THIS]

call in the morning and say you have diarerra. I did that a couple years ago , and they had no problem with me not going. (no i did not have diarerra )


AJ, worked like a charm! :yourock:

[Jim]

and you got the day off from work?:yourock:

[TORQUE THIS]

No, I'm at work... I like my job... :notworking:

What is going on tonight, tomorrow?? I need to re-torque and put the Garrett back on. Would prefer to do it tomorrow in the am...

[PRattenbury]

Well, I was going to pull my chitbox into the corner, rip the pump and turbo off, and give them to Matt. It's up to Matt when he puts the stuff on his truck.

[Jim]

unless UPS comes to my door I got nuttin tonight....

[TORQUE THIS]

How late are you gonna stay Paul?? I'm beat, still tryin to get over this cold, stomach thang I got goin on...

I will be there in the am then I guess to work on mine.

[PRattenbury]

Not late. I have a cold, too. As for that stomach thang, don't eat so much. It'll go away. :falldownlaugh:

[Jim]

Dont worry paul, you can get there at 800 and leave at 10, and your whole engine will be on the stand by morning :smilielol:

[PRattenbury]

All I need is an acetylene torch. I can do it! :exactly:

[Jim]

:anitoof: I will take good care of your bumper while the truck is down also:poke:

[Warpig]

Ok, who (moderator) did it? :dunno:

[Jim]

did wha? :dunno:

[TORQUE THIS]

The pud pullin smiley is gone... :poke:

[Jim]

:yankyank:

Nope?

[NETDP]

remember your momma told ya doing :yankyank: will make you go blind? Well................:smilielol:

[Warpig]

did wha? :dunno:

Hit the undelete button:SmackBottom:

[Jim]

matt you going up tomorro?

mark how did you wind up making out with the garrett install?

Check it out its now fixed :ShizenWinder: :)

[TORQUE THIS]

never went up, spent the afternoon looking for pics to post that got pulled...

[PRattenbury]

I went up for a couple hours tonight. Put the tools away I left out last night :nono: drained the coolant, took the alternator off, scratched my butt and stared at the clutch fan for a while, figured I'd better consult the book, pulled the heater hoses, upper radiator hose, coolant overflow, poked at the windshield washer reservoir a bit but didn't get it out, got one side of the fan shroud loose, bunch of little crap, but didn't get too much done really.

[Jim]

fan nut reverse thread IIRC, use a blunt tip on the air chisel and wack it good (:yankyank: :smilielol: ) and it should come off.

Lots of little stuff is whats time consuming so time well spent today:)

[Stark9802]

Matt. That show on Comedy Central was Trigger happy TV.

[Warpig]

http://www.newenglandturbodieselpower.com/Forums/showthread.php?p=623#post623

[Jim]

http://www.newenglandturbodieselpower.com/Forums/showthread.php?p=623#post623Can I post i dunno?:idea:

[Warpig]

Can I post i dunno?:idea:

:wtf2::dunno: What does that mean?

[Warpig]

What's this new N.E.T.D.P newbie stuff? and why do you keep adding numbers to your post count Jim??? I did the math and you are way off :whack:

[Jim]

always some kind of conspiracy theroy with that warpig fella....:stirthepot:

Tim changed the user titles around a little bcause the other ones sucked.

IRP is a heckuva long ride, I dunno if I can go in a car for that long, But somehow think the suffering is worth it...:smokin:

[Warpig]

I wish I could get a definate answer from you guys. We need to make reservations!!!!!!!

[matt95]

Tim I will definately go.

[matt95]

I got the turbo and pump in today :woohoo:

[Warpig]

Tim I will definately go.

OK.....great!! Now if AJ and Jim can give a definate answer then we can make reservations. Not to sound like a homo or anything but, I'm assuming that we are all not getting seperate rooms.

[Jim]

aw for christ sake Im down, but I aint sharin a room:notworking:

[Jim]

BTW im sure amerihost was full like 4 months ago...

[Warpig]

Well, since you know your way around down there, find us some lodging junior. I'm not sure if anyone would want to share a room with you and your problematic bowel :ThrowUp:

[Jim]

:falldownlaugh: :smilielol: I never been, so ask the moose mebbe he has some insight....

[PRattenbury]

I got the turbo and pump in today :woohoo:

So, any improvement with the new bombs? :popc1:

[TORQUE THIS]

Brake fluid mixed with Clorox makes smoke, and lots of it.

Matt, can you confirm this :popc1:

[Jim]

try it on a chlorine tablet for a pool and stand back:popc1:

[TORQUE THIS]

Smoke?? :smokin:

[Jim]

flameage.....

[Jim]

http://www.tb3.com/pyro/pegcl/PCBF01.mpg

[TORQUE THIS]

Damn, the page is blocked here at work... :notworking:

Have to wait till later... :duh:

[Jim]

Damn, the page is blocked here at work... :notworking:

Have to wait till later... :duh:

you need to hack that network:poke: :idea:

[Stark9802]

aw for christ sake Im down, but I aint sharin a room:notworking:

Whats a matter Jim? Can't you go 4 nights without....:yankyank: :smilielol:

[matt95]

:smilielol: :smilielol: :falldownlaugh:

[Jim]

Whats a matter Jim? Can't you go 4 nights without....:yankyank: :smilielol:

This coming from a guy who is known at the shop in Derby for his grip strength :falldownlaugh: :smilielol:

[matt95]

I have a funny story. Today after work I went to start my truck up and it sounded like I stripped the starter gear. So I was like:wtf2: . I opened the hood and looked down at the starter and it was hanging there. :idea: . So I went and got some new bolts and all is good. Must be the added hp.:exactly:

[Jim]

WTF gelled fuel this am wrote about it in the diesel tech section:nutkick:

[PRattenbury]

I'll be at the shop tonight ripping apart the red wagon. Figure I'll grab a couple hours wherever I can. :whip:

[matt95]

Paul, I am not working friday. Think I'll give the head a pull.:yankyank: Cylinder head that is.

[Jim]

Think I'll give the head a pull.:yankyank: Cylinder head that is.Whats wrong with your head. Cylynder head that is...:dunno:

[PRattenbury]

I was at the shop last night (Mark, too, and Betsey a.k.a the supervisor) got the radiator out. The fan hub nut is kicking my arse. Can't hold the pulley good enough to get the nut to loosen. :notworking: I think Thursday night I'll go back and yank the lift pump, and the balancer, if I have time left. Gotta wait till Friday to get the bumper off, then the intercooler and all the other coolers can come out. Should be pretty close to cam time then. :muahaha:
Anyone going to the shop Friday night from up near Dan McPherson? He still has my cam gear.

[Jim]

im sure you already know its reverse thread, try an air chisel with a blunt tip on the edge of the nut.

[Moose]

The fan hub nut is kicking my arse. Can't hold the pulley good enough to get the nut to loosen. :notworking:


Paul, Take out the 4 10MM bolts that hold the Fan Pulley Bracket to the block. Three are out in the open, and the 4th is on the edge of the pulley, you will have to back it out, while you or someone else holds the assembly. You are goning to have to pull the fan pulley bracket anyway to remove the front cover.:duh: Moose:knob:

[Warpig]

Mark, are you still punching that thing???:yankyank:

[TORQUE THIS]

Paul, Take out the 4 10MM bolts that hold the Fan Pulley Bracket to the block. Three are out in the open, and the 4th is on the edge of the pulley, you will have to back it out, while you or someone else holds the assembly. You are goning to have to pull the fan pulley bracket anyway to remove the front cover.:duh: Moose:knob:

We tried that, the one just behind the pulley is slightly rounded... :nutkick:

[TORQUE THIS]

Mark, are you still punching that thing???:yankyank:


:wtf2: :dunno: :poke:

[PRattenbury]

I read where some people have taken a piece of flat bar and drilled 2 holes in it to attach to 2 of the fan pulley bolts. Then use the flat bar to hold the pulley still and loosen the 36mm nut. Tried a strap wrench last night. No joy.

[Jim]

http://www.amazon.com/Schley-Cummins-Heavy-Clutch-Wrench/dp/B00063YWX2

If this is what u have in mind, Id say you can defenetly make one cheaper:idea:

[John DiMartino]

ive got that wrench,but its kinda thin,and if the nut is stubborn,Id use a chisel to break it loose,it works better,or have someone putting pressure on thw wrench while a helper (shocks) the nut with the chisel.

[Jim]

DDP 4's Vs. 435's you were thinkin of....

http://www.cumminsforum.com/forum/94-98-performance-parts-discussion/16012-new-era-435s-vs-ddp4s-results.html

[PRattenbury]

http://www.amazon.com/Schley-Cummins-Heavy-Clutch-Wrench/dp/B00063YWX2

If this is what u have in mind, Id say you can defenetly make one cheaper:idea:

Naww. I can get a grip on the big nut. The tricky part is getting a good enough grip on the pulley. The air hammer is looking better and better....

[PRattenbury]

DDP 4's Vs. 435's you were thinkin of....

http://www.cumminsforum.com/forum/94-98-performance-parts-discussion/16012-new-era-435s-vs-ddp4s-results.html

I happen to know where a set of DDP4's are... :smokin:

[Jim]

I happen to know where a set of DDP4's are... :smokin:

Your a bad man! :muahaha:

[Jim]

Naww. I can get a grip on the big nut. The tricky part is getting a good enough grip on the pulley. The air hammer is looking better and better....

worked for me!

[matt95]

I guess I will be going with the dd4s after reading that. More power and run cooler. Can't beat that.

[PRattenbury]

Yep. Definitely nice stix.

[Jim]

get a set from rat racing, run the debt up a little more.:beerchug:

Paul, what are you thinking, dragon flows?:idea:

[PRattenbury]

Maybe some Don M stix? Mach 6? :idea:

[Warpig]

Paul, don't ya think you are getting a bit carried away?:crazy::ineeddrugs:

[TORQUE THIS]

Those 12 valve guys will do anything to be like us 24 valve guys... :exactly:
:falldownlaugh: :stirthepot:


:popc1:

[Jim]

we do replace our injection pumps alot....:falldownlaugh:

[Moose]

we do replace our injection pumps alot....:falldownlaugh:

And the VP44 is a POS!!??!!:nutkick: :crazy: :SmackBottom:

[TORQUE THIS]

And the VP44 is a POS:


No it isn't... just the guy who dosen't put it on the right way... :exactly: :nutkick:

[PRattenbury]

Heck, we replace stuff so often we need our own dedicated 12 valve corner in the shop. Too many moving parts and computers in those other trucks. :popc1:

[Jim]

And the VP44 is a POS!!??!!:nutkick: :crazy: :SmackBottom:

Yes it is.:exactly:

[PRattenbury]

C'mon Jim, tell us how you really feel.:stirthepot:

[John DiMartino]

And the VP44 is a POS!!??!!:nutkick: :crazy: :SmackBottom:

Dont thell that to my vp44 yet! It is still going strong at over 130K miles,most of that over 500hp,and tons of plowing hours.Knock on wood ,I got a good one.:nutkick:

[PRattenbury]

I'm heading for Derby again tonight, think I'll go after the lift pump and the vacuum/power steering stuff. I don't think I have the patience for that fan quite yet. I'd probably have the smoke wrench take it out for me. :duh:

[Jim]

Ill bring my air chisel (and my snow making equipment) :beerchug:

[PRattenbury]

Snow making??? :dontgetit:
Should I pull the DDP4's for Matt? :stirthepot:

[Warpig]

Might as well give him the tranny too :smilielol:

[Jim]

Snow making??? :dontgetit:



Blue snow :idea:

[PRattenbury]

And the bumpers, and the leather seats.....

[Jim]

Should I pull the DDP4's for Matt? :stirthepot:
you gotta pull em anyways:dunno:

[Jim]

I will take your tranny....:smokin:

[TORQUE THIS]

http://www.cnn.com/2007/SHOWBIZ/TV/02/08/anna.nicole.collapses/index.html

[Jim]

http://www.cnn.com/2007/SHOWBIZ/TV/02/08/anna.nicole.collapses/index.html

wow her son just died....

[PToombs]

Yeah, can ya believe that! Wife had it on when I came home. There goes a nice set! :yankyank: I bet the undertaker does her! :sheephump:
Oh by the way! Is that AJ's personal smilie? I notice it get used alot in the same sentence.

[Jim]

Yeah, can ya believe that! Wife had it on when I came home. There goes a nice set! :yankyank: I bet the undertaker does her! :sheephump:
Oh by the way! Is that AJ's personal smilie? I notice it get used alot in the same sentence.

Hell hes probably done worse lookin chicks:dunno:

A few people on here have personal smiles, its out of coincidence though, of coruse:exactly:

[TORQUE THIS]

I bet the undertaker does her!

You are a SICK, SICK, SICK man! :popc1: :smilielol:

Hopefully it will be on YouTube!

[Jim]

speaking of videos, have you seen this GEM?

Arent the back doors of a cruiser locked when your on the inside?

http://www.break.com/index/bystanders_too_close_for_building_demolition.html

[Stark9802]

Hell hes probably done worse lookin chicks:dunno: :

If I have? - I don't remember? :beerchug:

and ptoombs...only the CT guys are allowed to use the sheep face against me. :nutkick:

:falldownlaugh: