Dyno day in mass

[Ramdriver15]

Alright we are approved, i know i know its a little soon seeing there was just one in new hampshire.
Rick, Mobildynodude, Will be the dyno opperator/owner. We will be setting up ina a marina in Houghsneck, MA. Its actually Quincy, Ma. Just a small city. We do not have a date yet but like mid july to late july is what we were thinking.

If any of you all are interested post back and i will get directions posted, and a date set. It will be most likley a saturday event!
Thanks,
John

[dieselnomad]

If I'm in town, I'll most likely come. I won't run since I haven't done anything to the truck 'cept brake line, lug nut, and vac pump :smilielol:. Ah heck, maybe i will run.

I'm outta my mind and town after 3rd week of july until 2nd week of aug - driving most of the way across country.. Nice for you all to know that.. :coorslight:

[Ramdriver15]

alright, mabe we wil see ou there, i have toi get with rick and set it all up...

[HomeBeerBrewer]

As of right now, the first and second Saturdays of July are booked, so it looks like the 21st or 28th. John, pick the date soon, because I have someone who is thinking of the 21st, but they haven't gotten back to me yet. I told him that until he confirms it, I have to leave it open in case someone else wants it. And I'm expecting a couple of others to want the dyno for a weekend event in July, but so far, neither has made a commitment... yet.

[Ramdriver15]

lets say the 28th... that sounds like a good day, last weekend in mass, better make it a good one:woohoo: .....

[HomeBeerBrewer]

Ok, the 28th it is! I'll post this on a couple of other sites too.

[BelgianMagic]

Ok, the 28th it is! I'll post this on a couple of other sites too.

the 28th is something big on Dodge truck world and Diesel truck world

MIGHT WANT THE FIRST WEEK IN AUG...Just my .02:m2c:

[HomeBeerBrewer]

Can you post a link to that? I've tried looking it up, but couldn't find any info on it.

[Ramdriver15]

this is the oly weekend i can be available, the weekend befor eim getting some fresh paint and then the following weekend i treck out to ohio for school:woohoo:

[rpidelt]

How much to run?

[BelgianMagic]

here are a few
http://dodgetruckworld.tenmagazines.com/ew/topic.asp?id=267186&s=house_warming_party_pig_roast_728
http://dodgetruckworld.tenmagazines.com/ew/topic.asp?id=267224&s=ma_chapter_invited
http://dodgetruckworld.tenmagazines.com/ew/topic.asp?id=267222&s=chapter_bbq

[Ramdriver15]

i think rick said 75 for three pulls then 25 for each additional or something???

[HomeBeerBrewer]

You are correct John, $75 for three pulls. You will also get a printout of all your pulls.

[HomeBeerBrewer]

Thanks Belgian, looks like we have a little competition. Gooch's is on the 21st, so at least we don't have to compete with him since we are now set for the 28th.

[DOUG]

First weekend in August is the 4Wheel Jambo in Vermont.
Family Events (http://www.familyevents.com/eventinfo.asp?id=81)

[Ramdriver15]

Alright im looking for interested people.
If there is enough interest then we can hold this event on july 28th. We can take as many people as we can get!!

Rick , have you found any interested people yet? i have had no luck

[HomeBeerBrewer]

BlkRam1 from CT is trying to get a bunch of guys to come up. If we don't have much of a response from the guys around here, maybe we should look for some place in western MA to hold it. I have at least one local guy that would be interested, but he hasn't given me a definite answer yet. He says that it's too early for him to say whether he can make it or not and to remind him about a week before.

[Ramdriver15]

alright we can see how it works out, and no one has replied tot he thin g on dtr

[Ramdriver15]

any takers at all??? any interest???

[Ramdriver15]

address is 15 bayswater ave. quincy, ma 02169!!!

[HomeBeerBrewer]

Cool, so your grandfather worked his magic to get us that spot?

Google Map (http://maps.google.com/maps?f=q&hl=en&geocode=&q=15+bayswater+ave.+quincy,+ma+02169&sll=37.0625,-95.677068&sspn=44.118686,59.677734&ie=UTF8&z=16&iwloc=addr&om=1)

[Ramdriver15]

heck yeah, and he got a the 220 outlet by the boat ramp :) wee have it blocked off for the day!!!!:woohoo:

[HomeBeerBrewer]

Great! Now we need to get some people to show up.

I'll bump the 2 sites I posted it on, you wanna bump dtr?

[Ramdriver15]

ill try but i think everyone on there is also here at netdp...

[HomeBeerBrewer]

ill try but i think everyone on there is also here at netdp...

And they should be. I think this site is way better!

[HomeBeerBrewer]

Bump...

Any interest in the dyno day? We need a RSVP by Wednesday, July 8th. Please post here if you plan on attending. We have a couple people interested, but I'd like to get at least 5 confirmed. John's grandfather has an electrician coming in to install a new circuit just for the dyno. I don't want him to pay for it if this doesn't happen.

[dieselnomad]

sorry, but as much as I want to go, I can't. I'll be travelling in the mid-west at this time. If it happens, have fun! :)

[HomeBeerBrewer]

John, I guess we aren't having much luck. I say we call it off so your grandfather doesn't put that circuit in for nothing. I have a couple of guys that are interested, but they haven't given me a definite answer as of today.

[Ramdriver15]

alrighty, then it is all done. I will let him know tomorrow and such. Thanks for the effort...